 |
|
|
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
| Summit
E & XL Flush Manifold Systems |
Get Acrobat Reader | ||
| Installation Instruction-Summit E Flush Manifold | Installation Instruction-Summit XL Flush Manifold
|
The Summit E manifolds are designed to work with the Summit and Summit E and come in 3 sizes: 3-port, 5-port and 8-port. The 5 and 8-port manifolds come with filters to prevent clogging. These manifolds can be mounted either directly on to the unit or on the wall underneath it. The XL manifold comes as 8-port only. It is mounted to the wall, 8-10 inches below the dispenser. These manifolds offer the following benefits:
|
Description |
Code # |
|
 |
OPL Flush Manifold, 3-port without strainer, with 3 clog-resistant check valves, 60 psi flow washer and plug |
1204843 |
 |
OPL Flush Manifold, 5-port with strainer, with 5 check valves, 60 psi flow washer and plug |
1204844 |
 |
OPL Flush Manifold, 5-port with strainer, with 5 gray clog-resistant check valves, 60 psi flow washer and 2 plugs |
1207573 |
 |
OPL Flush Manifold, 8-port with strainer, with 8 clog-resistant check valves, 60 psi flow washer and 2 plugs |
1205620 |
 |
XL Flush Manifold, 8-port with 4 hole plugs, with 6 clog-resistant check valves, flow switch, pressure switch, 60 psi flow washer, water strainer and brass solenoid |
1204845 |
Flush manifolds
come with mounting hardware, a wire harness and PCB connector/adaptor
for connecting to the pump box PCB, All manifolds include enough tubing
and hose clamps to connect pump outlets to manifold check valves. Transport
tubing length to washer sold separately, as length requirements vary.
Accessory Kits
| Description | Code No. |
| Pressure regulator, 0-25 psi (with the 60 psi flow washers in the manifolds above, only required if water pressure is over 60 psi) | 050892 |
| Flush manifold inline water strainer, 80 mesh | 1205467 |
| Flush manifold strainer kit with 1/2" B fittings | 1206359 |
| Sour flush kit (T-fitting) | 069505 |
| Backflow prevention kit with PRZ valve and distribution manifold to serve 4 flush manifolds | 035267 |
| Backflow prevention valve only | 035297 |
| Gray check valve, 1/4" MPT, 3/8" B | 094024 |
| Clog-resistant check valve without spring, 1/4" MPT, 3/8" B | 1203747 |
| Solenoid valve spare for flush manifold (for obsolete manifold 069293 only) | 1203940 |
| Adapter, flow switch to manifold (for obsolete manifold 069293 only) | 1203972 |
Check valve for flush manifold (3/8" B 1/4" MPT) 10 pack |
1202605 |
Solenoid valve for XL flush manifold |
094332 |
Solenoid valve, brass (for 1204843, 1204844, 1205620 and 1204845) |
1207648 |
Pressure switch for 1204845 |
1207674 |
Flow switch with harness, XL manifold |
1207669 |
Flow switch without harness, XL manifold |
1207661 |
"E" manifold harness for 1204843, 1204844, 1205620, 1207573 |
1207861 |
PCB for manifold using "E" pump box PCB's (small PCB) |
1206897 |
Home | FAQs | Documents | News & Events|Contact Us
2841
Mission St., Santa Cruz CA 95060 USA
Customer
Service: (831) 426-0882 : Toll Free in USA: (800) 858-2382 :Fax: (831)
423-4573
Technical Support: (410) 228-1292 : Toll Free in USA: (800) 468-4893 :
Fax: (410) 228-6055
Copyright
© 2007 Beta Technology All Rights Reserved
