Beta Home

Summit E Time, Formula, Sequence, Relay and Tunnel Dosing	Documents	Get Acrobat Reader
Summit E Time, Formula, Sequence, Relay and Tunnel Dosing	Installation and Operating Manual (English)	Brochure
	Installation Instruction-Flush Manifold	Installation Instruction-Data Module
	Quick Programming Guide	Slide Presentation-Summit E and XL Benefits (PowerPoint format)
	Slide Presentation-Summit E and XL Benefits (pdf format)	Slide Presentation-Summit E and XL Installation, Troubleshooting and Maintenance (PowerPoint format)
	Slide Presentation-Summit E and XL Installation, Troubleshooting and Maintenance (pdf format)

Click here for higher resolution photo

Click here for pump 100 Series spares

Click here for 600 Series spares

Click here for Flush Manifolds

Summit E is a 2-8 pump laundry and dry cleaning dosing system for washers up to 200 lbs (100 kg). 600 and 100 Series pumps are interchangeable on the unit. It supports 16 formulas, handles all washer types and is easy to install and program.

•	Programmerless relay mode
•	Speed control for longer tube life
•	Single screen programming
•	Tubes usually last over a year
•	Formula copy
•	Instant programming with setup copy
•	Up to three pumps run simultaneously
•	Computer data interface PCB and software reporting option

Component	Descripton	Code No.
Programmer	Includes 25' cable and mounting screws	1201354
TR-6000 external trigger module	Includes 25' cable and Velcro mounting	069300

Summit E system consists of a pump box and trigger module. A programmer is needed to install the unit and for formula selection, but you don't need to leave one connected to the system after Relay Mode, coin-op or single-formula installation.

Main Pump Boxes

600 Series	100 Series	Internal Trigger Module	Tubing	Pump Box Size	Code No.
	2	Included	Flex	Small	1205219
	2	Included	Viton	Small	1205218
	3	Included	Flex	Small	1205220
	4	Included	Flex	Small	1205221
2		Included	EPDM	Small	1204676
2		Included	Viton	Small	1204677
2		None	EPDM	Small	1204678
3		Included	EPDM	Small	1204679
3		None	EPDM	Small	1204680
4		Included	EPDM	Small	1204681
4		None	EPDM	Small	1204682
5		Included	EPDM	Large	1204683
5		None	EPDM	Large	1204684
6		Included	EPDM	Large	1204685
6		None	EPDM	Large	1204686
Auxiliary Pump Boxes
1	EPDM	Small	068715
2	EPDM	Small	068716
3	EPDM	Small	068717

Installation Kit

Description	Code No.
Install kit for 2 pumps, (20', 3/8" ID EVA transport tubing, 2 standpipes, 15' 206A 4-conductor wire, strain relief power cord, 4 hose clamps) Not used with flush manifold	1205283
Install kit for 3 pumps, (100', 3/8" ID EVA transport tubing, 6 hose clamps, 4 hose clamps, 4 hose clamps of 7) Not used with flush manifold	069902
Install kit for 4-6 pumps, (150', 3/8" ID EVA transport tubing, 10 hose clamps, 20' of 10 conductor wire) Not used with flush manifold	069903

Accessories

Description	Code No.
Data PCB, stores and reports data to ManageNet, requires Protocol Converter #097906 for data transfer to laptop on open modem (not included)	1205364
ManageNet	099050
Cable extension kit - 25 ft. for communication between pump box and TR-6000 as well as TR-6000 and programmer	068855
Cable - 24' for communication between pump box and TR-6000 as well as TR-6000 and programmer	068744
Cable - 24' for communication between pump box and TR-6000 as well as TR-6000 and programmer	1201029
Cable - 100' for communication between pump box and TR-6000 as well as TR-6000 and programmer	1204588
Low level drum lance, 5 gal. pail (alarm probe) - Requires 1 x 1201005 connector (not included)	1201180
Low level drum lance, 30-55 gal. pail (alarm probe) - Requires 1 x 1201005 connector (not included)	1203503
Sonic alarm - Requires 1 x 1201005 connector (not included)	1200452
Alarm I/O connector used for optional sonic alarm output and low level sensor input option. If both used, order 2 per Summit E	1201005
Temperature hygiene probe kit	068976
Plastic solenoid valve (to replace pump for solid laundry)	093278
Standpipe, 1/2" ID x 18" long w/3 check valves and plug	1202756
Adapter, 600M QDC to 100F QDC	1206955
Standpipe, 34" long, 1/2" ID, 1/2" FPT with 1/2" B fitting, requires 1207657 to use with 3/8" ID tube	1202522
Standpipe, 1/2" ID, schedule 80 PVC	1208155
Standpipe, 3/4" ID, schedule 80 PVC	1208154
Straight fitting, 1/2" MPT x 3/8" B (allows use of large standpipe with 3/8" ID tube)	1207657

Spare Parts

Description	Code No.
TR-6000 trigger PCB	068921
E/XL pump drive PCB	1205112
Power supply PCB	1206791

Home | FAQs | Documents | News & Events|Contact Us

2841 Mission St., Santa Cruz CA 95060 USA
Customer Service: (831) 426-0882 : Toll Free in USA: (800) 858-2382 :Fax: (831) 423-4573
Technical Support: (410) 228-1292 : Toll Free in USA: (800) 468-4893 : Fax: (410) 228-6055